To master the correct method of cleaning machine is to reduce the machine time, improve production efficiency, avoid the parts damage, improve the service life of the equipment, the important measure to ensure reliable operation.
Note: before cleaning machine first cut off power supply; Secondly, it is forbidden to wash machine.
The machine before the machine, first of all, will be feeder line end cover bolt spin out, will be feeder line core is taken out, after stamp, electricity open induced draft fan, for the whole machine cleaning machine, the procedure is as follows:
1, clean up the main grinding, using pure air blowing off, dust will be induced draft fan suction dust removing box, adhesion in the main deputy of grinding powder using acetone or water wipe, that day must be kept within the main grinding and surface is smooth and clean.
2, the cyclone sieve cleaning: A, first will be feeder line connecting flange joints, with A flat carton shell or stainless steel plate in the sealed under the action of wind. With pure air source (has no oil or water source) blasting powder in the screen. B, cyclone sieve sieve frame remove clean: remove the screen, a stuck into living wrench nut cover, another anti-clockwise rotation motor crank sieve can be launched.
3, cyclone separator cleaning: A, feeder all flange joints of the damper with pure air blowing off powder for the inner surface of cyclone separator, the hotel or recommended with high-power bucket type vacuum cleaner to remove adhesive powder in the lining. B, remove the upper part of the cyclone separator connection parts, take out after a thorough cleaning machine.
ENGLISH
ÖÐÎÄ
